 |
Sell Mimaki CG-130FXII Cutting Plotter - www.hazelprinter.com |
High speed continuous crop mark detection
An optical sensor enables automatic consecutive detection of crop marks throughout the nested image which the Inkjet printer prints, in combination with the automatic adjustment function to obtain precise contour cutting.
Mimaki's proprietary "Half Cut" technology
With the half cut function, the backing sheet is cut, but a few connection points are left to hold the decal in place. The decal can then be easily detached from the rest of the media. Various media without a backing sheet can also be cut.
More Features
- Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
- Selectable three jog speeds ensure proper and easy positioning of the head to the point.
- Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
- Media can be loaded from back or front.
- Up to 6 rolls of media can be set at once (1 set standard).
- Plug-in cutting software for CorelDRAW and Illustrator is included.
- A special adaptor to use commercially available pens and a USB interface are included.
| Model | CG-75FXII | CG-130FXII | CG-160FXII | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Acceptable sheet width | 90mm~1,040mm (3.54"~40.9") | 90mm~1,580mm (3.54"~62.0") | 90mm~1,880mm (3.54”~74”) | |||||||
| Acceptable roll sheet | Outer less than φ200mm , Roll weight less than 18kg | Outer less than φ200mm Roll weight less than 22kg | ||||||||
| Effective cutting area*1 | 760mm x 51m(29.9" x 167') | 1,300mm x 51m(51.2" x 167') | 1,600mm×51m(62.9”×167’) | |||||||
| Maximum auto cutting width*2 | 870mm (34.2”) | 1,425mm (56.1”) | 1,720mm (67.7”) | |||||||
| Maximum cutting speed | 100cm/s (39.3"/s) | |||||||||
| Maximum moving speed | 140cm/s (55"/s) | |||||||||
| Adjustable speed range*3 | 1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment) |
|||||||||
| Mechanical resolution | 5µm(0.0002") | |||||||||
| Command resolution | 25µm or 10µm(0.001" or 0.0004")-MGL-IIc | |||||||||
| Repeatability | ±0.2mm (Excluding shrinkage / expansion caused by the film temperature) |
|||||||||
| Pen pressure | 400g | |||||||||
| Range of down pressure | Cutter | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | ||||||||
| Pouncing | 10~20g(2g step), 20~100g(5g step), 100~400g(10g step) | |||||||||
| Pen | 10~20g(2g step), 20~100g(5g step), 100~150g(10g step) | |||||||||
| Acceptable sheet*4 | Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet |
|||||||||
| Acceptable sheet for pouncing*5 | Paper thickness: 0.06~0.13mm (0.0024"~0.005") | |||||||||
| Applicable tools*6 | Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool |
|||||||||
| Type of command | MGL-IIc | |||||||||
| Interface | RS-232C,USB | |||||||||
| Receiver buffer size | 30MB Standard (20MB when in sorting) | |||||||||
| Operational | Temperature | 5~35°C (41~95°F) | ||||||||
| Humidity | 35~75%(Rh) Non-condensation | |||||||||
| Power requirement | AC100V~240V | |||||||||
| Power consumption | 130VA or less | |||||||||
| Dimensions (WxDxH) | 1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9") |
1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9") |
2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9") |
|||||||
| Weight (with stands) | 50kg(110 lbs.) | 60kg(132 lbs.) | 69kg(152 lbs.) | |||||||
0 komentar:
Posting Komentar