Better Image Quality Through State-of-the-Art Print Technology
The VersaStudio utilizes the same advanced print technology as
Roland’s VersaCAMM VS series. The new piezo inkjet head prints up to
1440 dpi using variable droplet technology with seven precise droplet
sizes to optimize image quality. Roland Intelligent Pass Control™
Technology delivers exceptional quality prints with smoother gradations,
richer density and deeper image saturation for photographic and vector
output. Best of all, the print technology is built to last. The
gold-plated head reduces static, preventing clogging, and a
patent-pending wiper system decreases wear and tear on the print head
and prolongs its life by reducing buildup.
Three Different Ink Choices - Including Metallic Silver Ink
The BN-20 offers a choice of three different ink configurations.
Four-color (CMMYK) is the best choice for standard process color inkjet
printing. Eco-SOL MAX offers fast drying time, high density, wide color
gamut, rugged scratch resistance, low cost per square foot and broad
uncoated media support. Eco-SOL MAX is virtually odorless, and graphics
are water and UV resistant up to three years outdoors** without
lamination. ** CMYK only The five color inkset — combining metallic
silver ink with CMYK — is the premier choice for versatility and market
competitiveness. This allows you to add value and sophistication to
virtually any graphic on a wide range of media, including clear vinyl
and films, fine art paper, canvas, and photobase paper. Metallic Silver
Eco-SOL MAX ink — recognized as DPI Product of the Year — can be
printed as a spot color, or combined with CMYK to produce over 500
striking metallic and pearlescent colors. The new Metallic Texture
Library adds 26 different texture fills as well. A third configuration,
CMYK aqueous ink, is also available for the BN-20. This high-density
water-based ink creates brilliant colors and excellent print quality,
for short-term indoor applications. The ink configuration must be
selected at the time of install. It is not possible to change the ink
configuration after a selection has been made and the printer has been
inked up.
The BN-20 features a new cutting carriage design that does not bounce
against the media if the cutting force is set too high for the
substrate. Combined with the largest cutting force of all Roland
print/cut devices at 300 grams, precision control of Z movement keeps
the cutting consistent and virtually eliminates common problems inherent
in drag knife contour cutting technology with simple up/down
electronic controls.
No Roland Has Ever Been Easier to Use
The BN-20 is the easiest to use of any device in the Roland printer
lineup. All functionality of the device is handled through the
VersaStudio utility software. The utility software package is actively
open in the Windows® taskbar and controls basic machine functions,
status and calibrations. The utility software also monitors replacement
of consumable parts like wipers and contour cutting blades.
Bundled Design Software
The VersaStudio comes complete with R-Works, an entry-level design
package created by Roland. It allows you to import stock photos or
personal photos taken with a digital camera, create original layouts
with text, and edit custom print and cut graphics. R-Works also
includes a vector art library of stock designs.
Developed exclusively for Roland inkjet printers and printer/cutters,
VersaWorks RIP software ensures exceptional production output with
unmatched ease of use. Based on the latest Adobe CPSI 3019 engine,
VersaWorks includes advanced error diffusion, 16-bit rendering, and the
Roland Color system, which accurately reproduces more than 1,000
standard colors and 512 metallic colors. With Roland@NET, updates are
free and easy, automatically uploaded through your Internet connection.
VersaWorks is fully compatible with Windows 7, Vista and XP.
Hazel Printer Installation Training and Support
All
HazelPrinter.com wide format printers, will require professional
installation and training services, which we offer at an additional
cost. All printers will also require freight delivery and insurance too.
Please contact your HazelPrinter.com representative for details and
added cost quotes for these services, as they vary depending on your
location and needs.
| Model | VersaStudio BN-20 |
| Printing method / Cutting method |
Piezoelectric inkjet / Grit roller feed |
| Acceptable media |
Width |
5.9 to 20.3 in. (150 to 515 mm) |
| Thickness |
Printing: Maximum 39 mil (1.0 mm) with liner |
| Cutting: Maximum 16 mil (.4 mm) with liner |
| Roll Weight |
Maximum 13.2 lbs (6 kg) |
| Roll Outer Diamater |
Maximum 5.9 in (150 mm) |
| Core Diamater |
2 in (50.8 mm)or 3 in (76.2 mm) cores |
| Printing/cutting width1 |
Maximum 18.9 in (480 mm) |
| Ink cartridges |
Type |
| Ink Cartridges |
Type & Capacity |
Roland ECO-SOL MAX or FPG Aqueous, 220 ml only |
| Colors |
5 Color – CMYK+Mt (Cyan, Magenta, Yellow, Black and Metallic Silver) or CMYK+Wh (Cyan, Magenta, Yellow, Black, and White) |
| 4 Color - CMMYK (Cyan, Magenta, Yellow, Black) |
| Printing resolution |
Max 1440 dpi |
| Cutting Blade |
Type |
Roland CAMM-1 series cutter blade |
| Blade Offset |
Fixed at 0.250 mm |
| Cutting speed |
0.4 (10 mm/s) to 5.9 in/s (150 mm/s) |
| Blade force |
30 to 300gf |
| Software resolution (when cutting) |
0.000984 in/step (0.025 mm/step) |
| Distance accuracy (when printing)2,3 |
Error of less than ± 0.3 % of distance traveled, or ± 0.3mm (0.012 in), whichever is greater. |
| Distance accuracy (when cutting)2,4 |
Error of less than ± 0.4 % of distance traveled, or ± 0.3mm (0.012 in), whichever is greater. |
| Repetition accuracy (When cutting)2,5 |
±0.004 in (± 0.1mm) or less |
| Alignment accuracy for printing and cutting2,6 |
±0.020 in (± 0.5mm) or less |
| Alignment accuracy for printing and cutting when reloading media2,7 |
Error of less than ± 0.5% of distance traveled, or ± 0.012 in (3mm), whichever is greater |
| Print Heater Temperature8 |
Fixed at 95o F (35oC) |
| Connectivity |
USB 2.0 |
| Power-saving function |
Automatic sleep feature / AC 100 to 240V ± 10%, 1.5 A, 50/60 Hz |
| Power Consumption |
During Operation |
Approx. 90 W |
| Sleep Mode |
Approx. 5.5 W |
| Acoustic Noise Level |
During Operation |
62 dB (A) or less |
| During Standby |
42 dB (A) or less |
| Dimensions/Weight |
39.2" W x 23" D x 11.5" H (995 W x 585 D x 291 H mm), 79.4 lbs (35 kg) |
| Operating Conditions |
Power on |
Temperature: 68o - 90o F (20 to 32o C), humidity: 35 - 80% RH (non condensing) |
| Power off |
Temperature: 41o - 104o F (5 to 40o C), humidity: 20 - 80% RH (non condensing) |
| Included Items |
Power cord, USB cable, blade, blade holder, Rolandsoftware Package9, Software RIP (VersaWorks), User's Manual, etc |
|
| *1 The length of printing or cutting is subject to the limitations of the program. |
| *2 Using Roland specified media, loaded correctly,
temperature: 25°C (77°F), humidity: 50 %RH, all pinch rollers are
used, 25 mm or more for both right and left margins and 35 mm or more
front margin, excluding expansion or contraction of the emdia, and
all correction and adjustment functions of this machine have been
made properly. |
| *3 Using Roland specified media, print travel of 1m. |
| *4 Using Roland specified media, cut travel of 1m. |
| *5 Range for assured repetition accuracy: Length 1,000 mm. |
| *6 Provided that media length is under 1,000 mm.
Excluding possible shift caused by expansion/contraction of the media
and/or by reloading the media. |
| *7 Using Roland specified media, data size: 1,000 mm in
the media-feed direction, 480 mm in the carriage-movement direction.
No lamination. Automatic detection of crop marks at 4 points when
media is reloaded. Excludes the effects of skewed movement and of
expansion and contraction of the media. |
| *8 Warm-up is required after power up. This may require
5 to 20 minutes, depending on the operating environment. The preset
temperature may fail to be reached 35°C (95°F) depending on the
ambient temperature and media width. |
*9 Roland Software Package includes: Windows driver, OnSupport software, utility software and R-Works design software
|
| SKU: |
ROCBN20 |
| External dimensions |
39.2 (W) x 23 (D) x 11.5 (H) in (995 (W) x 585 (D) x 291 (H) mm) (77 lbs (35 kg)) |
| Ink Cartridges |
Roland Eco-SOL MAX ink 5 Colors ([Eco-SOL MAX] CMYK, Metallic Silver) 4 Colors ([Eco-SOL MAX] CMYK) / 4 Colors ([FPG Aqueous] |
| Max Cutting Width |
18.9 in (480 mm) |
| Power Requirements |
AC 100 to 240±10 %, 7.2 A, 50/60 Hz |
| Resolution |
Max 1440 dpi |
http://www.hazelprinter.com
BalasHapus